• Management Pack:  Windows Server DHCP
  • MP Version:  6.0.7295.0
  • Released:  8/21/2015
  • Publisher:  Microsoft

DHCP IPv4 Scope NACKs Occurring Monitor Monitor

  • ID:  Microsoft.Windows.DHCPServer.Library.IPv4Scope.UnitMonitor.LeaseAvailability.2
  • Description:   
  • Target:  DHCP IPv4 Scope
  • Enabled:  Yes

Operational States

Name State Description
First Event Raised Warning  
Second Event Raised Success  

Alert Details

Monitor State Message Priority Severity Auto Resolution
First Event Raised (Warning) DHCP IPv4 Scope NACKs Occurring Reminder Medium Match Monitor Health Yes

Run As Profiles

Name
DHCP Server Action Account

Monitor Knowledgebase

Summary
This discovery does not contain any summary.
Causes
This unit monitor does not contain any causes.
Resolutions

A DHCP client might decline an address from the server if:

  • A reservation is already assigned to another media access control (MAC) address.

  • Static IP addresses on the network are put under exclusion ranges.

This condition should resolve itself, but if it persists, you can reconfigure reservations or exclusion ranges on the DHCP server.

Reconfigure client reservations

Client reservations allow you to reserve a specific IP address for permanent use by a DHCP client. Typically, reservations are used if the client has an IP address that was assigned by using another method for TCP/IP configuration.

Reservation IP addresses cannot be modified. If you want to change the IP address of a reservation, delete the reservation, and then re-create it with the new IP address.

To perform these procedures, you must be a member of the Administrators group, or you must have been delegated the appropriate authority.

To delete the reservation and then re-create it with the new IP address:

  • At the DHCP server, click Start, point to Administrative Tools, and then click DHCP.

  • In the DHCP console tree, click Reservations.

  • In the details pane, select the reserved client for which you want to change the IP address.

  • To delete the current reservation, on the Action menu, click Delete.

  • Add a new reservation in DHCP that uses the new IP address for the client.

Reconfigure exclusion ranges

To prevent address conflicts, the scopes that you define must exclude the IP addresses of devices that you statically configure, such as DHCP servers. By setting exclusion ranges, an administrator can exclude IP address ranges within a scope so that those addresses are not offered to DHCP clients. When you create a new scope, immediately exclude IP addresses of the existing statically-configured computers. Excluded IP addresses can be active on your network, but only when these IP addresses are manually configured or distributed as reserved IP addresses.

To perform these procedures, you must be a member of the Administrators group, or you must have been delegated the appropriate authority.

To reconfigure exclusion ranges:

  • At the DHCP server, click Start, point to Administrative Tools, and then click DHCP.

  • In the DHCP console tree, expand the scope you want to configure.

  • Select and right-click Address Pool under the appropriate scope.

  • Select New Exclusion Range.

  • In the Add Exclusion dialog box, type the starting and ending IP addresses of the exclusion range, and then click Add.

External References
This monitor does not contain any external references.

See Also for Windows Server DHCP Management Pack


Downloads for Windows Server DHCP Management Pack

AZURE OPTIMIZATION ASSESSMENT GET STARTED
MIGRATION TO AZURE GET STARTED
SYSTEM CENTER MIGRATION TO AZURE GET STARTED
MIGRATION TO AZURE FOR SQL AND WINDOWS 2008 GET STARTED