Percentage of Committed Memory in Use Monitor

  • ID:  Microsoft.Windows.Server.2008.OperatingSystem.PercentCommittedBytesInUse
  • Description:  Monitor the performance counter Memory\% Committed Bytes in Use
  • Target:  Windows Server 2008 Operating System
  • Enabled:  No

Operational States

Name State Description
Percent Committed Bytes OK Success The percent committed bytes is OK.
Percent Committed Bytes Critical Error The percent committed bytes is high enough to indicate a likely performance problem.

Overridable Parameters

Parameter Name Default Value Description Override
Frequency 120  
Threshold 80  

Alert Details

Monitor State Message Priority Severity Auto Resolution
Percent Committed Bytes Critical (Error) Percentage of Committed Memory in Use is too high Medium Critical Yes

Run As Profiles


Monitor Knowledgebase


The % Committed Bytes In Use (Memory\% Committed Bytes In Use) for the system has exceeded the threshold. Overall system performance may significantly diminish which will result in poor operating system and application performance.

The % Committed Bytes In Use performance counter represents the ratio of Memory\Committed Bytes to the Memory\Commit Limit. Committed Bytes is the amount of committed virtual memory while Commit Limit is the amount of virtual memory that can be committed without having to extend the paging file(s).

When this performance threshold has been exceeded, it often indicates that the page file could not be expanded, or expanded fast enough, to satisfy application memory requirements.


The amount of available physical memory can become low under the following circumstances:

  • Too many applications are running simultaneously on the computer.

  • An application may be leaking memory over time.


To confirm whether excessive paging is occurring, add the Avg. Disk sec/Transfer (a physical disk counter) and Pages/sec counter values. If the product of these counters exceeds 0.1, paging is taking more than 10 percent of disk access time. If this occurs over a long period, you probably need more memory.

Next, check for excessive paging due to running applications. If possible, stop the application with the highest working set value, and see if that dramatically changes the paging rate. If you suspect excessive paging, check the Pages/sec counter in System Monitor. This counter, which is part of the Memory object type, shows the number of pages that had to be read from disk because they were not in physical memory. (Notice the difference between this counter and Page Faults/sec, which indicates only that data was not immediately available in the specified working set in memory.)

To address a low physical memory condition an administrator may chose one or more of the following options:

  • Close or stop one or more applications, services, processes

  • Add additional Physical Memory to the computer

  • Move applications to one or more additional computers (applicable to Servers only)

If the system has been adequately provisioned with physical memory and application load but it continually exceeds the available physical memory threshold over time it’s possible that an application is leaking memory. To identify an application that is leaking memory an administrator can do the following:

Open up System Monitor and monitor the following system wide performance counters over time:

  • Paging File\% Usage

  • Paging File\%

  • Memory\Pool Nonpaged Bytes

  • Memory\Pool Paged Bytes

If any one of these counters continually increase over time it is possible that an application may be leaking memory. To view recent history for these performance counters you can use the following view:

If the system appears to be leaking memory, the specific application can be identified by monitoring the following counters for each running process using System Monitor:

  • Process\Page File Bytes

  • Process\Pool Nonpaged Bytes

  • Process\Pool Paged Bytes

  • Process\Private Bytes

  • Process\Thread Count

If a consistent and significant increase in any of these counters is observed it may be necessary to contact the application vendor for support.

External References
This monitor does not contain any external references.

See Also for Windows Server Operating System Management Pack

Downloads for Windows Server Operating System Management Pack